COMPLEX FOR THE STAVROPOL Territory
Specifications
Customer
Procurement Committee
Purposestrong,
Public needs
Square
95 m² и 25 m²
Number of pneumatic tents
7 pcs
Climate
Continental
Type of base
Any
Production date
2020
Deployment time
up to 30 minutes
Description
Mobile complex of air-framed shelters
Olymp Company regularly participates in tenders, public procurement and commercial auctions. We received the contract for this order precisely because of the victory in the tender. According to the technical specification from the customer (the procurement Committee of the Stavropol Territory), we manufactured six modules with an internal area of 82 m2 and one module with an area of 25m2.
The complex consists of inflatable arched structures with longitudinal beams (air-frame shelters) consisting of reinforced PVC fabric. The internal atmospheric pressure is maintained at 0.2 Atm using an automatic u.p.a.d. Without paging, the structure does not lose its shape for two days. An overpressure relief valve and a boost valve are provided in the frame. The snow load is 20 kg/m2. On the inner skin there are fasteners for the on-board cable and an electrical panel.
The package also includes energy-saving lamps in thin shades (at the rate of eight pcs. for a large shelter, and 2 pcs. for a small one), a frost-resistant cable, an electrical panel, a waterproof bottom, wall insulation, floor insulation, the presence of ventilation ducts, a pneumatic door and a curtain door, windows “on Velcro”.
Dimensions of a large shelter:
Length – 16 m;
Width – 6 m;
Height – 3.3 м;
Usable area – 82 m²;
Occupied area – 96 m².
Dimensions of a small shelter:
Length – 5 m;
Width – 5 m;
Height – 2.9 m;
Usable area – 19 m2;
Occupied area – 25 m2.
About the customer
The Stavropol Territory Committee on Public Procurement is an executive body authorized to ensure the implementation of state policy in the field of procurement to meet the needs of the Stavropol Territory, the organization of procurement monitoring to meet the needs of the Stavropol Territory.
The device of pneumatic tents
Arched structure with longitudinal beams and lower strapping made of reinforced PVC material. When inflated, the atmospheric pressure inside the structure is kept at 0.18 Atm, withstanding up to 25 kg of precipitation per square meter. The pressure relief valve located on the frame helps to remove excess pressure in case of severe heating of the tent. Under normal conditions, the frame lasts for three days without pumping, then a gradual decrease in pressure is possible
The outer awning is also made of PVC material. Completely sealed, can be made with the application of certain symbols or brand elements. The paint does not fade in the sun and is not subject to other environmental influences. Handles for carrying the module and rings for attaching it to the ground with the help of pins and guy ropes are attached to the awning for greater stability on windy terrain
A door with an inflatable frame. It has external and internal cladding, as well as a curtain that prevents air from entering from the street. Like the main structure, it is made of PVC
A door designed for technical use. It is twisted by the user independently, as in the case of an ordinary tourist tent. From bottom to top, it rolls into a roll and is attached to fasteners. It is also convenient for dragging dimensional things
Windows are added at the request of the customer. Made of transparent TPU film
It is attached to the ground with stakes and a drawbar. Withstand wind gusts up to 25 m/s (without dust), or up to 20 m/s, with dust saturation up to 5 g/m3
At the request of the customer, it is equipped with a insulated floor – heat insulator consisting of foil and porous layers located between layers of protective fabric. Such insulation can be used throughout the entire inner area of the tent
POWER GRID:
The pneumatic frame tent has a rubberized frost-resistant dust- and moisture-proof IP65, a 220 V main lighting cable network, 4 sockets for internal use are provided. The cable line is multi-stranded with connection at the connectors and terminals using cable lugs. It is assembled manually and passes the strictest control.
The pneumatic frame tent has a pressure maintaining device (APD) for continuous automatic operation of the inflating device in order to maintain the necessary excess air pressure in the frame of the product. The module is equipped with a turbocharging device, which is designed to create excess pressure in the pneumatic frame of the module when it is installed, as well as to pump air out of the pneumatic frame when the module is folded.
LIGHTING:
Lighting is provided on 4 LED lamps with a rated voltage of 220 V, the lamp power in the lamps is 150 W (according to the standard of incandescent lamps). The degree of protection is IP65. The lamp remains operational at ambient temperatures from minus 50 to plus 50 0 C. The lamps are attached by means of carabiners to the mounting rings on the inside of the tent ridge, connected to the on-board power grid by means of quick-release connections.
HEATING:
Master BV 77 (Italy)
Characteristics of the heating device:
dimensions: 1180 x 410 x 530mm;
Weight: 32 kg;
Heat output: 20 kW;
maximum air flow: 1550 m3/h;
tank capacity: 36 l;
electric motor power: 0.3 watts.
BRANDING AND COLOR DESIGN:
By agreement.
Calculate the cost of a tent
Call us:
8 (800) 250-54-99
Free of charge in Russia, we respond around the clock. We will be glad to hear from you!
Answer a few simple questions and we will send you a commercial offer
