TENT FOR THE CONTROL AND COMMUNICATIONS CENTER
Specifications
Customerstrong,
Communication Management
Purposestrong,
Headquarters placement
Areastrong,
30 and 37 m2
Number of pneumatic tents
2
Climate
Moderate
Type of base
Any
Production date
2021
Deployment time
up to 8 minutes
Description
Tent for the control and communication center
For a state government institution Volgograd region “Control and Communication Center” in 2021, we completed an order for the supply of two air-framed tents. The order was received due to the victory in the tender. A few technical points that were implemented according to the TOR from the customer. The main criterion for the client was the shortest deployment time, so we completed the order with a high-power pump. The deployment of the shelter took only 8 minutes.
Reinforced, gasoline-resistant, frost-resistant PVC with a double-sided polymer coating of different colors on each side resistant to UV light and microorganisms with a density of 650 g/m2 is used as the main material for both the frame of the products and for the external awning. Four viewing windows in each tent are made in the form of a 3-layer block. When opened, they are twisted into a roll and fixed in the upper position using a curly part for quick knot-free fastening with another part. Sleeves for the input and connection of heating and ventilation systems and the input of cable networks are made of fireproof tarpaulin and sewn with Kevlar threads. in the doorway, at the bottom, there is a threshold, at least 100 mm high from the floor, preventing moisture from entering the module.
The delivery package also includes energy-saving lamps, a frost-resistant cable, an electrical panel, a waterproof bottom, an ADF, wall insulation, floor insulation, a pneumatic door and a “Velcro” curtain door.
Dimensions of a small shelter:
Length –5.5m;
Width – 3.5 м;
Height –2.5m;
Usable area – 20 m2;
Dimensions of a large shelter:
Length –8.5 m;
Width – 4.2 m;
Height – 2.8 m;
Usable area – 37m2;
About the customer
The Control and Communication Center is included in the list of state authorities of the subjects of the Russian Federation (republics, territories, regions), except for the judiciary, representative offices of executive state authorities of the subjects of the Russian Federation under the President of the Russian Federation. Carries out a set of organizational and technical measures aimed at ensuring the functioning of the network.
The device of pneumatic tents
Arched structure with longitudinal beams and lower strapping made of reinforced PVC material. When inflated, the atmospheric pressure inside the structure is kept at 0.18 Atm, withstanding up to 25 kg of precipitation per square meter. The pressure relief valve located on the frame helps to remove excess pressure in case of severe heating of the tent. Under normal conditions, the frame lasts for three days without pumping, then a gradual decrease in pressure is possible
The outer awning is also made of PVC material. Completely sealed, can be made with the application of certain symbols or brand elements. The paint does not fade in the sun and is not subject to other environmental influences. Handles for carrying the module and rings for attaching it to the ground with the help of pins and guy ropes are attached to the awning for greater stability on windy terrain
A door with an inflatable frame. It has external and internal cladding, as well as a curtain that prevents air from entering from the street. Like the main structure, it is made of PVC
A door designed for technical use. It is twisted by the user independently, as in the case of an ordinary tourist tent. From bottom to top, it rolls into a roll and is attached to fasteners. It is also convenient for dragging dimensional things
Windows are added at the request of the customer. Made of transparent TPU film
It is attached to the ground with stakes and a drawbar. Withstand wind gusts up to 25 m/s (without dust), or up to 20 m/s, with dust saturation up to 5 g/m3
At the request of the customer, it is equipped with a insulated floor – heat insulator consisting of foil and porous layers located between layers of protective fabric. Such insulation can be used throughout the entire inner area of the tent
POWER GRID:
The pneumatic frame tent has a rubberized frost-resistant dust- and moisture-proof IP65, a 220 V main lighting cable network, 4 sockets for internal use are provided. The cable line is multi-stranded with connection at the connectors and terminals using cable lugs. It is assembled manually and passes the strictest control.
The pneumatic frame tent has a pressure maintaining device (APD) for continuous automatic operation of the inflating device in order to maintain the necessary excess air pressure in the frame of the product. The module is equipped with a turbocharging device, which is designed to create excess pressure in the pneumatic frame of the module when it is installed, as well as to pump air out of the pneumatic frame when the module is folded.
LIGHTING:
Lighting is provided on 4 LED lamps with a rated voltage of 220 V, the lamp power in the lamps is 150 W (according to the standard of incandescent lamps). The degree of protection is IP65. The lamp remains operational at ambient temperatures from minus 50 to plus 50 0 C. The lamps are attached by means of carabiners to the mounting rings on the inside of the tent ridge, connected to the on-board power grid by means of quick-release connections.
HEATING:
Master BV 77 (Italy)
Characteristics of the heating device:
dimensions: 1180 x 410 x 530mm;
Weight: 32 kg;
Heat output: 20 kW;
maximum air flow: 1550 m3/h;
tank capacity: 36 l;
electric motor power: 0.3 watts.
BRANDING AND COLOR DESIGN:
By agreement.
Calculate the cost of a tent
Call us:
8 (800) 250-54-99
Free of charge in Russia, we respond around the clock. We will be glad to hear from you!
Answer a few simple questions and we will send you a commercial offer
