Features

Usable area
up to 100 m²

Construction weight
from 50 kg

Inner width
up to 6 m

Operating temperature
from – 50 to +60 °C

Lifetime
at least 10 years

Installation time
up to 30 minutes

Inner height
up to 3.5 m

Windproof
up to 25 m/s

Material
reinforced PVC

Guarantee
1 year

Branding
Print on PVC or paint

Snowproof
up to 10 kg/m²

Benefits

  • Reliable and airtight. Thanks to a refined system for checking the quality of finished products;
  • Mobile. Deployment takes 15 minutes on almost any terrain;
  • Lightweight. Easy to use and transport because they do not require a metal frame;
  • Individual. We modify the existing line for specific customer needs. We apply elements of branding;
  • Thanks to the modular design, you can make entire tent complexes with showers, canteens and living modules;
  • Tents, designed to work in harsh conditions, are additionally equipped with a heater.

Operating conditions

The penetration of the cold inside the tent in winter is excluded. Thanks to the thermal insulation made of a set of isometric foil materials, as well as the possible furnace and heat guns, comfortable conditions are achieved inside the shelter even at – 50°C outdoors. Windows and doors are protected against the possible accumulation of precipitation in niches with special anti-flooding boards

Extended stay

Polar explorers and shift workers in the Far North stay away from stations for long periods of time. In the event of prolonged work in remote campsites, a mobile insulated Arctic tent is the only way to protect yourself from harsh environmental conditions.

Frost-resistant reinforced PVC material, of which all frame and awning surfaces are made, remains flexible even in severe frost, eliminating the possibility of «standing on a crutch»

Hidden Benefits

Developing such a module for your needs with an eye to the thermal zone in which the operation will take place, we can add a hole for a chimney outlet, then you can use a wood stove inside the tent.

Special handles are built into the frame and are designed to carry the already assembled tent over short distances. This is especially true when it is necessary to change the camp site, excluding the use of technology

Are you looking for a fast building?

Design of the pneumatic frame module

Arch construction with longitudinal beams and bottom strapping made of reinforced PVC material. When inflated, the atmospheric pressure inside the structure is kept at 0.18 Atm, withstanding up to 25 kg of precipitation per square meter. A pressure-relief valve located on the frame helps remove excess pressure in case the tent gets too hot. In normal conditions without pumping the frame holds three days, then there may be a gradual decrease in pressure

The outer tent is also made of PVC material. Fully sealed, can be made with the application of certain symbols or brand elements. The paint does not burn out in the sun and is not exposed to other environmental influences. Attached to the tent are handles for carrying the module and rings to attach it to the ground with pins and straps for greater stability in windy terrain

Door with inflatable frame. It has an outer and inner lining, as well as a curtain, which prevents the penetration of air from the street. Like the main structure, made of PVC

A door intended for technical use. It is rolled up by the user himself, as in the case of an ordinary tourist tent. Bottom-top rolls up and fastens with clasps. Also handy for dragging bulky items

Windows are added at the customer’s request. Made of transparent TPU-film

It is attached to the ground with stakes and strapping. Withstand wind gusts up to 25 m/s (without dust), or up to 20 m/s, with dust saturation up to 5 g/m³

At the request of the customer is equipped with an insulated floor – a thermal insulator, consisting of foil and porous layers, located between layers of protective fabric. This insulation can be used over the entire inner area of the tent

Additional equipment

ELECTRICITY:

Airframe tent has a rubberized frostproof dust and moisture protection IP65, cable mains electricity 220V, provides for 4 outlets for indoor use. The cable line is stranded and connected at connectors and terminals with cable lugs. It is assembled by hand and undergoes the strictest inspection.

The airframe tent has a pressure maintenance device (PPA) for continuous automatic operation of the inflation device in order to maintain the necessary excess air pressure in the product frame. The module is equipped with a turbo blower, which is designed to create excess pressure in the pneumatic frame of the module when it is installed, as well as to pump air out of the pneumatic frame when the module is rolled up.

LIGHTING:

Provided lighting on 4 LED lamps with nominal voltage of 220 V, the lamp power in the lamps 150 W (according to the standard incandescent lamps). Degree of protection IP 65. The luminaire remains functional at ambient temperatures from minus 50 to plus 50 C. Lights are attached by means of carabiners to the mounting rings on the inside of the ridge of the tent, connected to the on-board power grid by means of quick-release couplings.

HEATING:

Master BV 77 (Italy)

Characteristics of the heating device:

dimensions: 1180 x 410 x 530 mm;

weight: 32 kg;

heat output: 20 kW;

maximum airflow: 1550 m 3/h;

tank capacity: 36 l;

electric motor power: 0.3 W.

BRANDING AND COLOR DESIGN:

By agreement.

Calculate the cost of a module or complex

Give us a call:
8 (800) 250-54-99
Free in Russia, we answer around the clock. We would love to hear from you!

Answer a few simple questions and we will send you a quote

About company

«Olymp» is:

  • Major projects for city municipal services, the Ministry of Emergency Situations, educational institutions and other large enterprises;
  • High reliability of products due to quality control at each stage of production;
  • High-quality materials: five-layer reinforced high-density PVC, TPU, Oxford cloth;
  • Own unique products in development;
  • Deliveries to any region of Russia and abroad;
  • Supervising installation on large projects.

How we work

Our specialists are constantly working to improve our solutions. Each year we consistently expand the production capacity of our plant to best meet the needs of our customers. Our employees are always ready to provide you with information support and assistance in installation, repair and give comprehensive information on the operation of pneumohangars.

We are trusted

Anticovidal measures

Air-frame structures of the plant «Olymp» comply with sanitary and epidemiological regulations, including SP 3.1.3597-20 concerning the prevention of spread of COVID-19 virus.

The shelters have separate entrances and exits. It is acceptable to sanitize against harmful pathogens with all types of antiseptics and disinfectants.

The material is resistant to disinfectant chemicals and prolonged exposure to UV light. Conforms to all requirements of regulatory acts of Rospotrebnadzor.

Our pneumatic frame structures are ready to ensure not only the safety of stored products and equipment, but also the safety of your employees.

Do you need a fast-construction building?
Consult with us!

PVC material, which is not afraid
of the cold, snow and hurricane

Easy to transport, simple
in installation

Installation in a short time without
construction permits

Independent power supply, in case of power failure

Shipping all over Russia
and abroad

Production from 14 days

Delivery time

Geography of shipments

Feedback

REQUEST FOR A PNEUMODULE
BECOME A DEALER